Geared Upgraded Oil Pump Kit / Ford Ranger and Mazda BT-50 P5AT 3.2L / P4AT 2.2L

This is for:
1x P5AT / P4AT Upgraded Geared Engine Oil Pump Kit

Part Number
62051018

Suits 2011 all 5 cylinder 3.2 P5AT, 4 Cylinder 2.2 P4AT Ford Ranger / Mazda BT50 engines.

Factory vane style pumps are prone to 2 types of failures:
1 - Failing to self-prime when the oil is changed.
Oil changes must be done & the engine started within 5 minutes.
If you don’t restart the engine asap then an airlock occurs in the pump & the airlock prevents the vane pump from self-priming.
2 - Oil pump vanes break which results in oil pressure failure.
If the engine is not shut down within seconds the engine will spin the bearings damaging the crankshaft, conrods & block.

The solution is this upgraded Geared style oil pump.
Geared oil pumps have proven their reliability & produce higher oil pressure & volume than the original vane pump which increases the life of the engine.

This Oil Pump kit includes:

• Bolt to block off the vane oil pump service line
• Oil pick-up adaptor plate to fasten the plastic oil pick-up tube
• Oil strainer to the new pump

This will fit P5AT & P4AT Engines from
FORD EVEREST UA
UA1 UA2 07/2015-05/2022 3.2L P5-AT

FORD RANGER PX
PX1 07/2011-06/2015 2.2L P4-AT / 3.2L P5-AT
PX2 07/2015-08/2018 2.2L P4-AT / 3.2L P5-AT
PX3 09/2018-05/2022 2.2L P4-AT / 3.2L P5-AT

MAZDA BT-50 B22 B32 UP UR 
UP,UR MZ-CD 2.2L P4-AT RWD 11/2011-06/2020
UP0YF1,UR0YF1 MZ-CD 3.2L P5-AT 11/2011-06/2020

If a chain is run out of alignment it increases chain wear, because of this we also have available an alignment tool (available separately for $86.25 extra)

This item ships directly from Kiwi Cylinder Heads to your door